4.1.1. AMS driver

The AMS driver is a new program introduced in the 2018 release that unifies the way in which different computational engines of Amsterdam Modelling Suite are called. You can find more information about AMS in the corresponding part of the documentation.

4.1.1.1. Preparing input

Note

Input files handling in the AMS driver is case insensitive.

The input file for the AMS driver consists of keys and values organized in blocks and subblocks:

Task GeometryOptimization

GeometryOptimization
    Convergence
        Gradients 1.0e-4
    End
End

Properties
   NormalModes true
End

System
    Atoms
        C       0.00000000       0.00000000       0.00000000
        H       0.63294000      -0.63294000      -0.63294000
        H      -0.63294000       0.63294000      -0.63294000
        H       0.63294000       0.63294000       0.63294000
        H      -0.63294000      -0.63294000       0.63294000
    End
End

Engine DFTB
    Model DFTB3
    ResourcesDir DFTB.org/3ob-3-1
EndEngine

Such a structure can be reflected in a natural way by a multi-level character of Settings. The example input file presented above can be generated by:

s = Settings()
#AMS driver input
s.input.ams.Task = 'GeometryOptimization'
s.input.ams.GeometryOptimization.Convergence.Gradients = 1.0e-4
s.input.ams.Properties.NormalModes = 'true'
#DFTB engine input
s.input.DFTB.Model = 'DFTB3'
s.input.DFTB.ResourcesDir = 'DFTB.org/3ob-3-1'

m = Molecule('methane.xyz')
j = AMSJob(molecule=m, settings=s)
j.run()

If an entry is a regular key-value pair it is printed in one line (like Task GeometryOptimization above). If an entry is a nested Settings instance it is printed as a block and entries inside this instance correspond to the contents of that block.

One of the blocks is special: the engine block. It defines the computational engine used to perform the task defined in all other blocks. The contents of the engine block are not processed by the AMS driver, but rather passed to the corresponding engine instead. Because of that every AMS input file can be seen as composed of two distinct parts: the engine input (everything inside the engine block) and the driver input (everything apart from the engine block). That distinction is reflected by how a Settings instance for AMSJob is structured. As we can see, the input branch of job settings is divided into two branches: the ams branch for the driver input and the DFTB branch for the engine input.

Note

In general, PLAMS will use all the contents of the ams branch (spelling not case-sensitive) to construct the driver input and the contents of every other branch to construct a separate engine block with the same name as the branch (like DFTB in the example above). In the present moment only applications with a single engine block are implemented in the AMS driver, but that will most likely change in the near future.

The contents of each branch of myjob.settings.input are translated to a string using the same logic:

  • Entries within each block (including the top level) are listed in the alphabetical order.

  • Both keys and values are kept in their original case.

  • Strings used as values can contain spaces and all kinds of special characters, including new lines. They are printed in an unchanged form in the input file.

  • If you need to put a key without any value, you can use True or an empty string as a value:

    s.input.ams.block.key = True
s.input.ams.otherkey = ''

### translates to:

block
  key
end

otherkey

  • If a value of a key is False or None the key is omitted.

  • En empty Settings instance produces an empty block:

    s.input.ams.emptyblock = Settings()
s.input.ams.otherblock #short syntax equivalent to the line above

### translates to:

emptyblock
end

otherblock
end

  • More instances of the same key within one block can be achieved by using a list of values instead of a single value:

    s.input.ams.constraints.atom = [1,5,4]
s.input.ams.constraints.block = ['ligand', 'residue']

### translates to:

constraints
  atom 1
  atom 5
  atom 4
  block ligand
  block residue
end

  • Some blocks require (or allow) something to be put in the header line, next to the block name. Special key _h is helpful in these situations:

    s.input.ams.block._h = 'header=very important'
s.input.ams.block.key1 = 'value1'
s.input.ams.block.key2 = 'value2'

### translates to:

someblock header=very important
  key1 value1
  key2 value2
end

  • Another kind of special key can be used to override the default alphabetic ordering of entries within a block, or just to insert arbitrary strings into the block:

    s.input.ams.block._1 = 'entire line that has to be the first line of block'
s.input.ams.block._2 = 'second line'
s.input.ams.block._4 = 'I will not be printed'
s.input.ams.block.key1 = 'value1'
s.input.ams.block.key2 = 'value2'

### translates to:

block
  entire line that has to be the first line of block
  second line
  key1 value1
  key2 value2
end

  • If a value of a key needs to be a path to some KF file with results of a previous AMS calculation, an instance of AMSJob or AMSResults (or directly KFFile) can be used (see AMSJob.get_input() for details):

    oldjob = AMSJob(...)
oldjob.run()
newjob = AMSJob(...)
newjob.settings.input.ams.loadsystem.file = oldjob
newjob.settings.input.ams.loadengine = (oldjob, 'dftb')

### translates to:

loadengine /home/user/plams_workdir/oldjob/dftb.rkf

loadsystem
  file = /home/user/plams_workdir/oldjob/ams.rkf
end

Note

The algorithm translating Settings contents into an input file does not check the correctness of the given data - it simply takes keys and values from Settings and prints them in the text file. Due to that you are not going to be warned if you make a typo, use a wrong keyword or improper syntax.

4.1.1.2. Preparing runscript

Runscripts for the AMS driver are very simple (see AMSJob.get_runscript()). The only adjustable option (apart from usual pre, post, shebang and stdout_redirect which are common for all single jobs) is myjob.settings.runscript.nproc, indicating the number of parallel processes to run AMS with (like with -n flag or NSCM environmental variable).

4.1.1.3. Molecule handling

There are several ways in which the description of the simulated system can be supplied to AMSJob. The most convenient one is simply by passing a Molecule instance:

mol = Molecule('/path/to/some/file.xyz')
myjob = AMSJob(name='test', molecule=mol, settings=...)

or:

mol = Molecule('/path/to/some/file.xyz')
myjob = AMSJob(...)
myjob.molecule = mol

A Molecule instance stored as the molecule attribute is automatically processed during the input file preparation and printed in the proper format (see AMS manual for details). Various details of this process can be adjusted based on attributes of the supplied Molecule. If mol.lattice is nonempty, the information about periodicity vectors is printed to the lattice subblock of the system block. If the supplied lattice consists of 1 or 2 vectors that do not follow the convention requied by AMS (1D – vector aligned with X axis; 2D – vectors aligned with XY plane) the whole system is rotated to meet these criteria. If mol.properties.charge exists, it is used as the charge key in the system block.

Moreover, each Atom present in the supplied Molecule has its own properties attribute that can be used to adjust the details of the line generated for this atom in the atoms block:

  • The atomic symbol is generated based on the atomic number stored in the atnum attribute of the Atom. The atomic number of 0 corresponds to the “dummy atom” for which the symbol is empty.
  • If atom.properties.ghost exists and is True, the atomic symbol is prefixed with Gh..
  • If atom.properties.name exists, the name is added after the atomic symbol, separated by a single dot.
  • Leading, trailing and double dots are removed from the atomic symbol.
  • If atom.properties.suffix exists, it is placed at the end of the line, after the numerical coordinates (it should ba a string)

Example:

mol = Molecule('xyz/Ethanol.xyz')
mol[1].properties.ghost = True
mol[2].properties.name = 'D'
mol[3].properties.ghost = True
mol[3].properties.name = 'T'
mol[4].properties.atnum = 0
mol[4].properties.name = 'J.XYZ'
mol[5].properties.atnum = 0
mol[5].properties.name = 'J.ASD'
mol[5].properties.ghost = True
mol[6].properties.suffix = 'whatever text'
myjob = AMSJob(molecule=mol)

The corresponding fragment of the input file produced by the above code:

system
  atoms
      1      Gh.C       0.01247       0.02254       1.08262
      2       C.D      -0.00894      -0.01624      -0.43421
      3    Gh.H.T      -0.49334       0.93505       1.44716
      4     J.XYZ       1.05522       0.04512       1.44808
      5  Gh.J.ASD      -0.64695      -1.12346       2.54219
      6         H       0.50112      -0.91640      -0.80440   whatever text
      7         H       0.49999       0.86726      -0.84481
      8         H      -1.04310      -0.02739      -0.80544
      9         O      -0.66442      -1.15471       1.56909
  end
end

Another, more cumbersome way to provide the system information to AMSJob is to manually populate the system block in job settings:

s = Settings()
s.input.ams.system.atoms._1 = 'H     0.0    0.0     0.0'
s.input.ams.system.atoms._2 = 'O     1.0    0.0     0.0'
s.input.ams.system.charge = 1.0
#other settings adjustments
myjob = AMSJob(settings=s)

An alternative way of supplying molecular coordinates is to use the GeometryFile key in the system block:

s = Settings()
s.input.ams.system.geometryfile = '/path/to/some/file.xyz'
#other settings adjustments
myjob = AMSJob(settings=s)

(Currently only the extended XYZ format for details) is supported.)

Finally, one could use the LoadSystem top-level key and point to an existing .rkf file with results of some previous calculation:

s = Settings()
s.input.loadsystem = '/path/to/some/ams.rkf'
#other settings adjustments
myjob = AMSJob(settings=s)

4.1.1.3.1. Multiple molecules

The AMS driver allows multiple occurences of the system block in the input file. Different system blocks are distinguished by their names defined in the header of the block:

system protein
    atoms
    ...
    end
end
system ligand
    atoms
    ...
    end
end

The system without such a name is considered the main system.

Multiple systems can be used in AMSJob by setting the molecule attribute to a dictionary, instead of a single Molecule. Such a dictionary should have strings as keys and Molecule instances as values. The main system should have '' (an empty string) as a key.

Other methods of providing the contents of the system block mentioned above can also be used to provide multiple system blocks. myjob.settings.input.ams.system can be a list containg multiple Settings instances, one for each system. Each such instance can be have manually filled atoms block or use the geometryfile key. Special header _h key can be used to set headers and hence names of different system blocks. Multiple instances of the LoadSystem key (also provided as a list, also with _h headers) can also be used.

All the methods mentioned above (molecule attribute, GeometryFile, LoadSystem, manual system block preparation) can be combined in any configuration. In case of a conflict, the data stored in settings.input.ams.system takes precedence over molecule. It is, however, the user’s responsibility to make sure that among all the systems provided there is exactly one main system (without a name).

4.1.1.4. AMSJob API

class AMSJob(name='plamsjob', molecule=None, settings=None, depend=None)[source]

A class representing a single computation with AMS driver. The corresponding results type is AMSResults.

get_input()[source]

Generate the input file. This method is just a wrapper around _serialize_input().

Each instance of AMSJob or AMSResults present as a value in settings.input branch is replaced with an absolute path to ams.rkf file of that job.

If you need to use a path to some engine specific .rkf file rather than the main ams.rkf file, you can to it by supplying a tuple (x, name) where x is an instance of AMSJob or AMSResults and name is a string with the name of the .rkf file you want. For example, (myjob, 'dftb') will transform to the absolute path to dftb.rkf file in myjob’s folder, if such a file is present.

Instances of KFFile are replaced with absolute paths to corresponding files.

get_runscript()[source]

Generate the runscript. Returned string is of the form:

AMS_JOBNAME=jobname AMS_RESULTSDIR=. $ADFBIN/ams [-n nproc] <jobname.in [>jobname.out]

-n flag is added if settings.runscript.nproc exists. [>jobname.out] is used based on settings.runscript.stdout_redirect.

check()[source]

Check if termination status variable from General section of main KF file equals NORMAL TERMINATION.

hash_input()[source]

Calculate the hash of the input file.

All instances of AMSJob or AMSResults present as values in settings.input branch are replaced with hashes of corresponding job’s inputs. Instances of KFFile are replaced with absolute paths to corresponding files.

classmethod from_inputfile(filename: str, heredoc_delimit: str = 'eor', **kwargs) → scm.plams.interfaces.adfsuite.ams.AMSJob[source]

Construct an AMSJob instance from an ADF inputfile or runfile.

If a runscript is provide than this method will attempt to extract the input file based on the heredoc delimiter (see heredoc_delimit).

static settings_to_mol(s: scm.plams.core.settings.Settings) → dict[source]

Pop the s.input.ams.system block from a settings instance and convert it into a dictionary of molecules.

The provided settings should be in the same style as the ones produced by the SCM input parser. Dictionary keys are taken from the header of each system block. The existing s.input.ams.system block is removed in the process, assuming it was present in the first place.

4.1.1.5. AMSResults API

class AMSResults(*args, **kwargs)[source]

A specialized Results subclass for accessing the results of AMSJob.

__init__(*args, **kwargs)[source]

Initialize self. See help(type(self)) for accurate signature.

collect()[source]

Collect files present in the job folder. Use parent method from Results, then create an instance of KFFile for each .rkf file present in the job folder. Collect these files in rkfs dictionary, with keys being filenames without .rkf extension.

The information about .rkf files generated by engines is taken from the main ams.rkf file.

This method is called automatically during the final part of the job execution and there is no need to call it manually.

refresh()[source]

Refresh the contents of files list.

Use the parent method from Results, then look at KFFile instances present in rkfs dictionary and check if they point to existing files. If not, try to reinstantiate them with current job path (that can happen while loading a pickled job after the entire job folder was moved).

engine_names()[source]

Return a list of all names of engine specific .rkf files. The identifier of the main result file ('ams') is not present in the returned list, only engine specific names are listed.

rkfpath(file='ams')[source]

Return the absolute path of a chosen .rkf file.

The file argument should be the identifier of the file to read. It defaults to 'ams'. To access a file called something.rkf you need to call this function with file='something'. If there exists only one engine results .rkf file, you can call this function with file='engine' to access this file.

readrkf(section, variable, file='ams')[source]

Read data from section/variable of a chosen .rkf file.

The file argument should be the identifier of the file to read. It defaults to 'ams'. To access a file called something.rkf you need to call this function with file='something'. If there exists only one engine results .rkf file, you can call this function with file='engine' to access this file.

The type of the returned value depends on the type of variable defined inside KF file. It can be: single int, list of ints, single float, list of floats, single boolean, list of booleans or string.

Note

If arguments section or variable are incorrect (not present in the chosen file), the returned value is None. Please mind the fact that KF files are case sensitive.

read_rkf_section(section, file='ams')[source]

Return a dictionary with all variables from a given section of a chosen .rkf file.

The file argument should be the identifier of the file to read. It defaults to 'ams'. To access a file called something.rkf you need to call this function with file='something'. If there exists only one engine results .rkf file, you can call this function with file='engine' to access this file.

Note

If section is not present in the chosen file, the returned value is an empty dictionary. Please mind the fact that KF files are case sensitive.

get_rkf_skeleton(file='ams')[source]

Return a dictionary with the structure of a chosen .rkf file. Each key corresponds to a section name with the value being a set of variable names present in that section.

The file argument should be the identifier of the file to read. It defaults to 'ams'. To access a file called something.rkf you need to call this function with file='something'. If there exists only one engine results .rkf file, you can call this function with file='engine' to access this file.

get_molecule(section, file='ams')[source]

Return a Molecule instance stored in a given section of a chosen .rkf file.

The file argument should be the identifier of the file to read. It defaults to 'ams'. To access a file called something.rkf you need to call this function with file='something'. If there exists only one engine results .rkf file, you can call this function with file='engine' to access this file.

All data used by this method is taken from the chosen .rkf file. The molecule attribute of the corresponding job is ignored.

get_input_molecule()[source]

Return a Molecule instance with initial coordinates.

All data used by this method is taken from ams.rkf file. The molecule attribute of the corresponding job is ignored.

get_main_molecule()[source]

Return a Molecule instance with final coordinates.

All data used by this method is taken from ams.rkf file. The molecule attribute of the corresponding job is ignored.

get_history_molecule(step)[source]

Return a Molecule instance with coordinates taken from a particular step in the History section of ams.rkf file.

All data used by this method is taken from ams.rkf file. The molecule attribute of the corresponding job is ignored.

get_engine_results(engine=None)[source]

Return a dictionary with contents of AMSResults section from an engine results .rkf file.

The engine argument should be the identifier of the file you wish to read. To access a file called something.rkf you need to call this function with engine='something'. The engine argument can be omitted if there’s only one engine results file in the job folder.

get_engine_properties(engine=None)[source]

Return a dictionary with all the entries from Properties section from an engine results .rkf file.

The engine argument should be the identifier of the file you wish to read. To access a file called something.rkf you need to call this function with engine='something'. The engine argument can be omitted if there’s only one engine results file in the job folder.

get_energy(unit='au', engine=None)[source]

Return final bond energy, expressed in unit.

The engine argument should be the identifier of the file you wish to read. To access a file called something.rkf you need to call this function with engine='something'. The engine argument can be omitted if there’s only one engine results file in the job folder.

get_frequencies(unit='cm^-1', engine=None)[source]

Return a numpy array of vibrational frequencies, expressed in unit.

The engine argument should be the identifier of the file you wish to read. To access a file called something.rkf you need to call this function with engine='something'. The engine argument can be omitted if there’s only one engine results file in the job folder.

recreate_molecule()[source]

Recreate the input molecule for the corresponding job based on files present in the job folder. This method is used by load_external().

If ams.rkf is present in the job folder, extract data from the InputMolecule section.

recreate_settings()[source]

Recreate the input Settings instance for the corresponding job based on files present in the job folder. This method is used by load_external().

If ams.rkf is present in the job folder, extract user input and parse it back to a Settings instance using scm.input_parser module. Remove the system branch from that instance.