7.7. Data Set¶

7.7.1. An example DataSet¶

The DataSet class contains expressions that are evaluated during the parameter optimization. For each new parameter set, the expressions are evaluated, and the results are compared to reference values.

The DataSet class contains a series of DataSetEntry. For example, a DataSet instance with 3 entries might look like this, when stored on disk in the text-based YAML format:

---
Comment: An example dataset
Date: 21-May-2001
dtype: DataSet
version: 0.5.1
---
Expression: angle('H2O', 0, 1, 2)
Weight: 0.333
Sigma: 3.0
Unit: degree, 1.0
---
Expression: energy('H2O')-0.5*energy('O2')-energy('H2')
Weight: 2.0
Sigma: 10.0
ReferenceValue: -241.8
Unit: kJ/mol, 2625.15
Description: Hydrogen combustion (gasphase) per mol H2
Source: NIST Chemistry WebBook
---
Expression: forces('distorted_H2O')
Weight: 1.0
ReferenceValue: |
   array([[ 0.0614444 , -0.11830478,  0.03707212],
          [-0.05000567,  0.09744271, -0.03291899],
          [-0.01143873,  0.02086207, -0.00415313]])
Unit: Ha/bohr, 1.0
Source: Calculated_with_DFT
...

where

• Comment, Date, dtype, and version are part of the header.

• H2O, O2, H2, and distorted_H2O are jobs that appear in the Job Collection.

• energy, forces, and angle are extractors that extract some result from a finished job.

• Expression and Weight are required for each data_set entry

• ReferenceValue is the reference value expressed in Unit. If no Unit is given, the unit must equal the default unit for the given extractor. If no ReferenceValue is given, it can be calculated by the ParAMS Main Script or with the Data Set Evaluator class.

• Sigma is the sigma value expressed in Unit. If no Sigma is given, it will equal the default sigma for the given extractor. For details, see Sigma vs. weight: What is the difference?.

• Source and Description are optional metadata keys. Arbitrary metadata keys can be used.

During the parameter optimization you may use both a training set and validation set. In that case you would have two separate DataSet instances: one for the training set, and one for the validation set. See the tutorial Training and validation sets.

Use the Data Set Evaluator class to evaluate the data_set expressions with any engine settings and to compare the results to the ReferenceValues.

For more details, see

• Load or store DataSet

• Adding entries

• Demonstration: Working with a DataSet

• Sigma vs. weight: What is the difference?

• Data Set Entry API

• Data Set API.

7.7.2. Load or store DataSet¶

Save the above text block with the name data_set.yaml. You can then load it into a DataSet instance with

from scm.params import *
data_set = DataSet('data_set.yaml')
print(data_set)

To save it to a new .yaml file, call the store() method:

data_set.store('new_file.yaml')

7.7.3. Adding entries¶

Add entries with the add_entry() method.

The arguments are:

• expression (required): The expression to be evaluated. The expression must be unique.

• weight (required): The weight of the entry. A larger weight will give a bigger contribution to the overall loss function. A larger weight thus indicate a more important data_set entry. The weight can either be a scalar or a numpy array with the same dimensions as reference. If weight is a scalar but reference is an array, then every component of the reference will be weighted with weight. See also Sigma vs. weight: What is the difference?.

• reference (recommended): The reference value, expressed in unit. If no reference value is given, it is possible to calculate it before the parametrization using the params main script. Can either be a scalar or a numpy array, depending on the extractor in expression.

• sigma (recommended): A value to normalize the expression (see Sigma vs. weight: What is the difference?). If no sigma value is given, a default one will be used depending on the extractor in the expression. If the expression contains more than one unique extractor, sigma is required. Sigma has the same unit as reference.

• unit (recommended): The unit of reference and sigma. Should be expressed as a 2-tuple ('label', conversion_ratio_float), where the ‘label’ is not used other than for being printed to the output, and conversion_ratio_float is a floating point number which is used to convert the default unit to the new unit. For example, unit for an energy might equal ('eV', 27.211) which will convert the default unit ('hartree', 1.0) to eV. The reference and sigma values should then be expressed in eV. NOTE: If you specify a unit you must also specify a sigma value, otherwise the default sigma will have the wrong unit.

• metadata (optional): A dictionary containing arbitrary metadata (for example sources for experimental reference data, or other metadata to help with postprocessing).

7.7.4. Demonstration: Working with a DataSet¶

Download data_set_demo.ipynb or data_set_demo.py

from scm.params import *
import numpy as np
data_set = DataSet()
data_set.add_entry("angle('H2O', 0, 1, 2)", weight=0.333)

print("String representation of data_set[-1]")
print(data_set[-1])
print("Type: {}".format(type(data_set[-1])))

String representation of data_set[-1]
---
Expression: angle('H2O', 0, 1, 2)
Weight: 0.333
Unit: degree, 1.0

Type: <class 'scm.params.core.data_set.DataSetEntry'>

data_set[-1].sigma = 3.0
print(data_set[-1])

---
Expression: angle('H2O', 0, 1, 2)
Weight: 0.333
Sigma: 3.0
Unit: degree, 1.0

data_set.add_entry("energy('H2O')-0.5*energy('O2')-energy('H2')",
                  weight=2.0,
                  reference=-241.8,
                  unit=('kJ/mol', 2625.15),
                  sigma=10.0,
                  metadata={
                      'Source': 'NIST Chemistry WebBook',
                      'Description': 'Hydrogen combustion (gasphase) per mol H2'
                  })
print(data_set[-1])

---
Expression: energy('H2O')-0.5*energy('O2')-energy('H2')
Weight: 2.0
Sigma: 10.0
ReferenceValue: -241.8
Unit: kJ/mol, 2625.15
Description: Hydrogen combustion (gasphase) per mol H2
Source: NIST Chemistry WebBook

try:
    data_set.add_entry("energy('H2O')-0.5*energy('O2')-energy('H2')", weight=2.0)
except Exception as e:
    print("Caught the following exception: {}".format(e))

Caught the following exception: Expression energy('H2O')-0.5*energy('O2')-energy('H2') already in DataSet.

forces = np.array([[ 0.0614444 , -0.11830478,  0.03707212],
                  [-0.05000567,  0.09744271, -0.03291899],
                  [-0.01143873,  0.02086207, -0.00415313]])
data_set.add_entry("forces('distorted_H2O')",
                  weight=1.0,
                  reference=forces,
                  metadata={'Source': 'Calculated_with_DFT'})
print(data_set[-1])

---
Expression: forces('distorted_H2O')
Weight: 1.0
ReferenceValue: |
   array([[ 0.0614444 , -0.11830478,  0.03707212],
          [-0.05000567,  0.09744271, -0.03291899],
          [-0.01143873,  0.02086207, -0.00415313]])
Unit: Ha/bohr, 1.0
Source: Calculated_with_DFT

print(data_set[-2].expression)
print(data_set[-2].weight)
print(data_set[-2].unit)
print(data_set[-2].reference)
print(data_set[-2].sigma)

energy('H2O')-0.5*energy('O2')-energy('H2')
2.0
('kJ/mol', 2625.15)
-241.8
10.0

print(data_set[-2].jobids)

{'H2', 'O2', 'H2O'}

print(data_set[-2].extractors)

{'energy'}

print(data_set[0].expression)
print(data_set[1].expression)
print(data_set[1].reference)
print(data_set["energy('H2O')-0.5*energy('O2')-energy('H2')"].reference)

angle('H2O', 0, 1, 2)
energy('H2O')-0.5*energy('O2')-energy('H2')
-241.8
-241.8

print(len(data_set))

3

print(data_set.get('expression'))
print(data_set.keys())

["angle('H2O', 0, 1, 2)", "energy('H2O')-0.5*energy('O2')-energy('H2')", "forces('distorted_H2O')"]
["angle('H2O', 0, 1, 2)", "energy('H2O')-0.5*energy('O2')-energy('H2')", "forces('distorted_H2O')"]

print(data_set.get('weight'))
print(data_set.get('extractors'))

[0.333, 2.0, 1.0]
[{'angle'}, {'energy'}, {'forces'}]

for ds_entry in data_set:
    print(ds_entry.expression)

angle('H2O', 0, 1, 2)
energy('H2O')-0.5*energy('O2')-energy('H2')
forces('distorted_H2O')

for expr in data_set.get('expression'):
    print(expr)

angle('H2O', 0, 1, 2)
energy('H2O')-0.5*energy('O2')-energy('H2')
forces('distorted_H2O')

ds_entry = data_set["energy('H2O')-0.5*energy('O2')-energy('H2')"]
print(data_set.index(ds_entry))

1

print(data_set[1].expression)

energy('H2O')-0.5*energy('O2')-energy('H2')

data_set.add_entry("energy('some_job')", weight=1.0)
print(len(data_set))
print(data_set[-1].expression)
del data_set[-1] # or del data_set["energy('some_job')"]
print(len(data_set))
print(data_set[-1].expression)

4
energy('some_job')
3
forces('distorted_H2O')

subset = data_set.from_expressions(["angle('H2O', 0, 1, 2)",
                                   "energy('H2O')-0.5*energy('O2')-energy('H2')"])
print(subset.keys())

["angle('H2O', 0, 1, 2)", "energy('H2O')-0.5*energy('O2')-energy('H2')"]

expression = "angle('H2O', 0, 1, 2)"
original_sigma = data_set[expression].sigma
print("For expression {} the original sigma value is: {}".format(expression, original_sigma))

subset[expression].sigma = 1234 # this modifies the entry in the original data_set
print(data_set[expression].sigma)
print(subset[expression].sigma)

# restore the original value, this modifies the subset!
data_set[expression].sigma = original_sigma
print(data_set[expression].sigma)
print(subset[expression].sigma)

For expression angle('H2O', 0, 1, 2) the original sigma value is: 3.0
1234
1234
3.0
3.0

new_subset = subset.copy()
new_subset[expression].sigma = 2345
print(new_subset[expression].sigma)
print(subset[expression].sigma)
print(data_set[expression].sigma)

2345
3.0
3.0

subset = data_set.from_jobids(['H2O', 'O2', 'H2'])
print(subset.keys())

["angle('H2O', 0, 1, 2)", "energy('H2O')-0.5*energy('O2')-energy('H2')"]

subset = data_set.from_metadata('Source', 'NIST Chemistry WebBook')
print(subset)

---
dtype: DataSet
version: 0.5.1
---
Expression: energy('H2O')-0.5*energy('O2')-energy('H2')
Weight: 2.0
Sigma: 10.0
ReferenceValue: -241.8
Unit: kJ/mol, 2625.15
Description: Hydrogen combustion (gasphase) per mol H2
Source: NIST Chemistry WebBook
...

subset = data_set.from_metadata('Source', '^N[iI]ST\s+Che\w', regex=True)
print(subset.keys())

["energy('H2O')-0.5*energy('O2')-energy('H2')"]

subset = data_set.from_extractors('forces')
print(subset.get('expression'))

["forces('distorted_H2O')"]

subset = data_set.from_extractors(['angle','forces'])
print(subset.get('expression'))

["angle('H2O', 0, 1, 2)", "forces('distorted_H2O')"]

subset = data_set.random(2, seed=314)
print(subset.keys())

["angle('H2O', 0, 1, 2)", "energy('H2O')-0.5*energy('O2')-energy('H2')"]

subset_list = data_set.split(2/3.0, 1/3.0, seed=314)
print(subset_list[0].keys())
print(subset_list[1].keys())

["forces('distorted_H2O')", "energy('H2O')-0.5*energy('O2')-energy('H2')"]
["angle('H2O', 0, 1, 2)"]

data_set.header = {'Comment': 'An example data_set', 'Date': '21-May-2001'}
print(data_set)

---
Comment: An example data_set
Date: 21-May-2001
dtype: DataSet
version: 0.5.1
---
Expression: angle('H2O', 0, 1, 2)
Weight: 0.333
Sigma: 3.0
Unit: degree, 1.0
---
Expression: energy('H2O')-0.5*energy('O2')-energy('H2')
Weight: 2.0
Sigma: 10.0
ReferenceValue: -241.8
Unit: kJ/mol, 2625.15
Description: Hydrogen combustion (gasphase) per mol H2
Source: NIST Chemistry WebBook
---
Expression: forces('distorted_H2O')
Weight: 1.0
ReferenceValue: |
   array([[ 0.0614444 , -0.11830478,  0.03707212],
          [-0.05000567,  0.09744271, -0.03291899],
          [-0.01143873,  0.02086207, -0.00415313]])
Unit: Ha/bohr, 1.0
Source: Calculated_with_DFT
...

data_set.store('data_set.yaml')

7.7.5. Calculating and Adding Reference Data with AMS¶

If some reference values are not yet available in the Data Set, the user can run AMS calculations to calculate them. Most conveniently this can be combined with JobCollection.run(), which will calculate all jobs with one engine. The DataSet.calculate_reference() method is responsible for extracting defined properties from a dictionary of AMSResults instances:

jc = JobCollection()
ds = DataSet()
# ... populate jc and ds

# Run all jobs in jc with MOPAC:
from scm.plams import Settings
engine = Settings()
engine.input.mopac
results = jc.run(engine)

# Extract calculated results and store in ds:
ds.calculate_reference(results)

The object passed to calculate_reference() must be a dictionary of {key : AMSResults}, where key is the string name of a job (see Adding Jobs to the Job Collection).

The Data Set will extract properties of all matching job names, as defined by the entries in the instance. For example, a Data Set instance with the entries hessian('water') and forces('methane') will expect a dictionary of {'water' : AMSResults, 'methane' : AMSResults} to be passed to calculate_reference() for a successful extraction.

7.7.6. Calculating the Loss Function Value¶

The loss function value is a metric of how similar two sets of results are. If all entries in a Data Set instance have a reference value, the DataSet.evaluate() method can be used to calculate the loss between the reference, and a results dictionary. The signature is similar to the above:

jc = JobCollection()
ds = DataSet()
# ... populate jc and ds

# Run all jobs in jc with UFF:
from scm.plams import Settings
engine = Settings()
engine.input.forcefield
results = jc.run(engine)

# Extract calculated results and store in ds:
loss = ds.evaluate(results, loss='rmsd')

When calculating the loss, each entry’s weight and sigma values will be considered. The loss argument can take a number of different Loss Functions.

7.7.7. Checking for Consistency with a given Job Collection¶

Data Set entries are tied to a JobCollection by a common jobID. The consistency of every DataSet instance can be checked with the DataSet.check_consistency() method. It will check if any DataSetEntry has jobids that are not included in a JobCollection instance and if so, return a list of indices with entries that can not be calculated given the Job Collection:

>>> # DataSet() in ds, JobCollection() in jc
>>> len(ds)
>>> 10
>>> bad_ids = ds.check_consistency(jc)
>>> bad_ids # `ds` entries with these indices could not be calculated given `jc`, meaning the property for the calculation of these entries requires a chemical system which is not present in `jc`
[1,10,13]
>>> del ds[bad_ids]
>>> len(ds)
7
>>> ds.check_consistency(jc) # No more issues
[]

The DataSet.check_consistency() method is equivalent to:

>>> bad_ids = [num for num,entry in enumerate(ds) if any(i not in jc for i in entry.jobids)]

7.7.8. Sigma vs. weight: What is the difference?¶

Sigma (σ) and weight both affect how much a given data_set entry contributes to the loss function.

For example, the loss function might be a sum-of-squared-errors (SSE) function:

where the sum runs over all data_set entries, \(w_i\) is the weight for data_set entry \(i\), \(y_i\) is the reference value, \(\hat{y}_i\) is the predicted value, and \(\sigma\) is the sigma.

The interpretation for sigma is that it corresponds to an “acceptable prediction error”. Sigma has the same unit as the reference value, and its magnitude therefore depends on which unit the reference value is expressed in. The purpose of sigma is to normalize the residual \((y_i-\hat{y}_i)\), no matter which unit \(y_i\) and \(\hat{y}_i\) are expressed in. In this way, it is possible to mix different physical quantities (energies, forces, charges, etc.) in the same training set.

The interpretation for weight is that it corresponds to how important one thinks a datapoint is. It has no unit.

For array reference values, like forces, the sigma value is the same for each force component, but the weight can vary for different force components in the same structure. If there are \(M_i\) force components for the structure \(i\), then

Summary table:

7.7.9. Data Set Entry API¶

class DataSetEntry(expression, weight, reference=None, unit=None, sigma=None, metadata=None)¶

A helper class representing a single entry in the DataSet.

Note

This class is not public in this module, as it is not possible to create these entries on their own. They can only be managed by an instance of a DataSet class.

Attributes

weightfloat or ndarray

The weight \(w\), denoting the relative ‘importance’ of a single entry. See Loss Functions for more information on how this parameter affects the overall loss.

referenceAny

Reference value of the entry. Consecutive DataSet.evaluate() calls will compare to this value.

unitTuple[str,float]

Whenever the reference needs to be stored in any other unit than the default (atomic units), use this argument to provide a tuple where the first element is the string name of the unit and the second is the conversion factor from atomic units to the desired unit. The weighted residual will be calculated as \((w/\sigma)(y-c\hat{y})\), where \(c\) is the unit conversion factor.

Important

Unit conversion will not be applied to sigma. Adjust manually if needed.

sigmafloat

To calculate the loss function value, each entry’s residuals are calculated as \((w/\sigma)(y-\hat{y})\). Ideally, sigma represents the accepted ‘accuracy’ the user expects from a particular entry.
Default values differ depending on the property and are stored in individual extractor files. If the extractor file has no sigma defined, will default to 1 (see Extractors and Comparators for more details).

expressionstr

The expression that will be evaluated during an DataSet.evaluate() call. A combination of extractors and jobids.

jobidsset, read-only

All Job IDs needed for the calculation of this entry

extractorsset, read-only

All extractors needed for the calculation of this entry

7.7.10. Data Set API¶

class DataSet(file=None, more_extractors=None)¶

A class representing the data set \(DS\).

Attributes:

extractors_folderstr

Default extractors location.

extractorsset

Set of all extractors available to this instance.
See Extractors and Comparators for more information.

jobidsset

Set of all jobIDs in this instance.

headerdict

A dictionary with global metadata that will be printed at the beginning of the file when store() is called. Will always contain the ParAMS version number and class name.

__init__(file=None, more_extractors=None)¶

Initialize a new DataSet instance.

Parameters:

filestr

Load a a previously saved DataSet from this path.

more_extractorsstr or List[str]

Path to a user-defined extractors folder.
See Extractors and Comparators for more information.

add_entry(expression, weight=1.0, reference=None, unit=None, sigma=None, metadata=None, dupe_check=True)¶

Adds a new entry to the cost function, given the expression, the desired weight and (optionally) the external reference value.
Skips checking the expression for duplicates if dupe_check is False. This is recommended for large cost functions >20k entries.

Parameters

expression: str

The string representation of the extractor and jobid to be evaluated. See Adding entries and Extractors and Comparators for more details.

weight: float, 1d array

Relative weight of this entry. See Adding entries for more details, see Loss Functions to check how weights influence the overall value.

reference: optional, Any

External reference values can be provided through this argument.

unitoptional, Tuple[str, float]

Whenever the reference needs to be stored in any other unit than the default (atomic units), use this argument to provide a tuple where the first element is the string name of the unit and the second is the conversion factor from atomic units to the desired unit. The weighted residual will be calculated as \((w/\sigma)(y-c\hat{y})\), where \(c\) is the unit conversion factor.

Important

Unit conversion will not be applied to sigma. Adjust manually if needed.

sigmaoptional, float

To calculate the loss function value, each entry’s residuals are calculated as \((w/\sigma)(y-\hat{y})\). Ideally, sigma represents the accepted ‘accuracy’ the user expects from a particular entry.
Default values differ depending on the property and are stored in individual extractor files. If the extractor file has no sigma defined, will default to 1 (see Extractors and Comparators for more details).

metadata: optional, dict

Optional metadata, will be printed when store() is called, can be accessed through each entry’s metadata argument.

dupe_check: True

If True, will check that every expression is unique per Data Set instance. Disable if working with large data sets.
Rather than adding an entry multiple times, consider increasing its weight.

calculate_reference(results, overwrite=True)¶

Calculate the reference values for every entry, based on results.

Parameters

resultsdict

A {jobid : AMSResults} dictionary:

>>> job = AMSJob( ... )
>>> job.run()
>>> DataSet.calculate_reference({job.name:job.results})

Can be ‘sparse’ (or empty == {}), as long as the respective entry (or all) alrady has a reference value defined.

overwritebool

By default, when this method is called, possibly present reference values will be overwritten with the ones extracted from the results dictionary. Set this to False if you want to override this behavior.

evaluate(results, loss: Type[scm.params.core.lossfunctions.Loss] = 'sse', return_residuals=False)¶

Compares the optimized results with the respective reference. Returns a single cost function value based on the loss function.

Parameters

resultsdict or DataSet

Same as calculate_reference(). Alternatively, a second DataSet instance can be used for an evaluation. In this case, the second instance’s reference values will be compared.

lossLoss, str

A subclass of Loss, holding the mathematical definition of the loss function to be applied to every entry, or a registered string shortcut.

return_residualsbool

Whether to return residuals, contributions and predictions in addition to fx.

Returns

fxfloat

The overall cost function value after the evaluation of results.

residualsList[1d-array]

List of unweighted per-entry residuals (or the return values of compare(y,yhat) in the case of custom comparators)
Only returned when return_residuals is True.

contributionsList[float]

List of relative per-entry contributions to fx
Only returned when return_residuals is True.

predictionsList[Any]

List of raw predictions extracted from the results. Note: the elements of this list do not necessarily have the same size as the elements of residuals.
Only returned when return_residuals is True.

…

get(key: str)¶

Return a list of per-entry attributes, where key determines the attribute, equivalent to:
[getattr(i,key) for i in self].

set(key: str, values: Sequence)¶

Batch-set the key attribute of every entry to a value from values. values must be the same length als the number of entries in the DataSet instance.
Equivalent to [setattr(e,key,v) for e,v in zip(self,values)].

load(yamlfile='data_set.yaml')¶

Loads a DataSet from a (compressed) YAML file.

store(yamlfile='data_set.yaml')¶

Stores the DataSet to a (compressed) YAML file.
The file will be automatically compressed when the file ending is .gz or .gzip.

copy() → scm.params.core.dataset.DataSet¶

Return a deep copy of the instance.

__contains__(key)¶

Key should be a full expression (for jobids only, iterate over jobids)!

__getitem__(idx)¶

Dict-like behavior if idx is a string, list-like if an int

__delitem__(idx: Union[int, Sequence[int]])¶

Delete one entry at index idx. Can either be an index (int) or an expression (str). In both cases a sequence can be passed to delete multiple elements at once

remove(entry)¶

Remove the DataSetEntry instance from this Data Set

index(entry)¶

Return the index of a DataSetEntry instance in this Data Set

keys()¶

Same as DataSet.get('expression')

__len__()¶

Return the length of this Data Set

__iter__()¶

Iterare over all DataSetEntries in this Data Set

__call__(key)¶

Same as __getitem__().

__eq__(other)¶

Check if two Data Sets are equal.

__ne__(other)¶

Return self!=value.

__add__(other)¶

Add two Data Sets, returning a new instance. Does not check for duplicates.

__sub__(other)¶

Substract two Data Sets, returning a new instance. Does not check for duplicates.

__str__()¶

Return a string representation of this instance.

__repr__()¶

Return repr(self).

property jobids¶

Return a set of all jobIDs necessary for the evaluation of this instance.

check_consistency(jc: scm.params.core.jobcollection.JobCollection) → Sequence¶

Checks if this instance is consistent with jc, i.e. if all entries can be calculated from the given JobCollection.

Parameters

jcJobCollection

The Job Collection to check against

Returns

List of entry indices that contain jobIDs not present in jc.
Use del self[i] to delete the entry at index i.

from_extractors(extractors: Union[str, List[str]]) → scm.params.core.dataset.DataSet¶

Returns a new Data Set instance that only contains entries with the requested extractors. For a single extractor, a string matching any of the ones in the extractors attribute can be passed. Otherwise a list of strings is expected.

Note

A shallow copy will be created, meaning that changes to the entries in the child instance will also affect the parent instance. If you do not want this behavior, use the copy() method on the returned object.

maxjobs(njobs, seed=None, _patience=100, _warn=True) → scm.params.core.dataset.DataSet¶

Returns a random subset of self, reduced to len(DataSet.jobids) <= njobs AMS jobs.

Note

Can result in a subset with a lower (or zero) number of jobs than specified. This happens when the data set consists of entries that are computed from multiple jobs and adding any single entry would result in a data set with more jobs than requested.
Will warn if a smaller subset is generated and raise a ValueError if the return value would be an empty data set.

Note

A shallow copy will be created, meaning that changes to the entries in the child instance will also affect the parent instance. If you do not want this behavior, use the copy() method on the returned object.

split(*percentages, seed=None) → Tuple[scm.params.core.dataset.DataSet]¶

Returns N=len(percentages) random subsets of self, where every percentage is the relative number of entries per new instance returned.

>>> len(self) == 10
>>> a,b,c = self.split(.5, .2, .3) # len(a) == 5 , len(b) == 2, len(c) == 3, no overlap

Note

Shallow copies will be created, meaning that changes to the entries in the child instances will also affect the parent instance. If you do not want this behavior, use the copy() method on the returned objects.

random(N, seed=None) → scm.params.core.dataset.DataSet¶

Returns a new subset of self with len(subset)==N.

Note

A shallow copy will be created, meaning that changes to the entries in the child instance will also affect the parent instance. If you do not want this behavior, use the copy() method on the returned object.

from_jobids(jobids: Set[str]) → scm.params.core.dataset.DataSet¶

Generate a subset only containing the provided jobids

Note

A shallow copy will be created, meaning that changes to the entries in the child instance will also affect the parent instance. If you do not want this behavior, use the copy() method on the returned object.

from_metadata(key, value, regex=False) → scm.params.core.dataset.DataSet¶

Generate a subset for which the metadata key is equal to value. If regex, value can be a regular expression.

Parameters

keystr

Metadata key

valuestr

Metadata value

regexbool

Whether value should be matched as a regular expression.

Note

A shallow copy will be created, meaning that changes to the entries in the child instance will also affect the parent instance. If you do not want this behavior, use the copy() method on the returned object.

from_expressions(expressions: Sequence) → scm.params.core.dataset.DataSet¶

Generate a subset data_set from the given expressions.

expressions: Sequence of str

The expressions that will form the new data_set.

Note

A shallow copy will be created, meaning that changes to the entries in the child instance will also affect the parent instance. If you do not want this behavior, use the copy() method on the returned object.

from_data_set_entries(entries: Sequence[scm.params.core.dataset.DataSetEntry]) → scm.params.core.dataset.DataSet¶

Generate a subset data_set from the given data_set entries.

entriessequence of DataSetEntry

The data_set entries that will make up the new data_set.

Note

A shallow copy will be created, meaning that changes to the entries in the child instance will also affect the parent instance. If you do not want this behavior, use the copy() method on the returned object.

from_weights(min_val=1.0, max_val=None, tol=1e-08) → scm.params.core.dataset.DataSet¶

Generate a subset for which the weights are in the interval [min_val, max_val]. If no max_val is given, max_val is set to equal min_val.

Note

A shallow copy will be created, meaning that changes to the entries in the child instance will also affect the parent instance. If you do not want this behavior, use the copy() method on the returned object.

print_contributions(contribs, fname, sort=True)¶

Print contribs to fname, assuming the former has the same ordering as the return value of get().

Parameters

contribsList

Return value of evaluate()

fnamestr

File location for printing

sortbool

Sort the contributions from max to min. Original order if disabled.

print_residuals(residuals, fname, weigh=True, extractors: Optional[List[str]] = None)¶

Print residuals to fname, assuming the former has the same ordering as the return value of get(). Entries can be limited to certain extractors with the respective keyword argument.

Parameters

residualsList

Return value of evaluate()

fnamestr

File location for printing

weighbool

Whether or not to apply the weights when printing the residuals

extractorsoptional, List[str]

If provided, will limit the extractors to only the ones in the list. Defaults to all extractors.

get_predictions(residuals: List, extractors: Optional[List] = None, fpath: Optional[str] = None, return_reference=False)¶

Return the absolute predicted values for each data set entry based on the residuals vector as returned by evaluate(), optionally print reference and predicted values for each entry to file.

Parameters

residualsList

Return value of evaluate()

extractors: optional, Sequence of strings

A list of extractors to be included in the output. Includes all by default.

fpathoptional, str

If provided, will print EXPRESSION, SIGMA, WEIGHT, REFERENCE, PREDICTION to file.

return_referencebool

If true, will return a 2-tuple (preds, reference) where each item is a List.

Returns

predsList of 2-Tuples

Returns a list where each element is a tuple of (expression, predicted value).

referenceList of 2-tuples

Returns a list where each element is a tuple of (expression, reference value). NOTE: this reference value is an “effective” reference value (np.zeros_like(preds)) if a comparator is used.

get_unique_metadata_values(key)¶

Return a set of all unique values for metadata entries.

Example for a data_set with 4 entries, the third lacks the “Group” metadata:

Group: a Group: b - Group: b

get_unique_metadata_values(‘Group’) then returns {None, ‘a’, ‘b’}

keystr

The metadata key.

group_by_metadata(key: str, key2: Optional[str] = None)¶

Return a dictionary of data_sets grouped by the metadata key.

If key2 is given, return a nested dictionary grouped first by key and then by key2.

Example for a data_set with 4 entries, the third lacks the “Group” metadata:

Group: a, SubGroup: d Group: a, SubGroup: d -, SubGroup: f Group: b, SubGroup: d Group: b, SubGroup: e

if key == ‘Group’ and key2 == None, returns {‘a’: DataSet[dsentry1,dsentry2], None: DataSet[dsentry3], ‘b’: DataSet[dsentry4, dsentry5]}

If key == ‘Group’ and key2 == ‘SubGroup’, returns {‘a’: {‘d’: DataSet[dsentry1, dsentry2]}, None: {‘f’: DataSet[dsentry3]}, ‘b’: {‘d’: DataSet[dsentry4], ‘e’: DataSet[dsentry5]}}

keystr

The first metadata key

key2str or None

The second metadata key

apply_weights_scheme(weights_scheme: scm.params.common.weights_schemes.WeightsScheme)¶

Apply weights scheme to all entries in data_set having ReferenceValues (entries without ReferenceValues are skipped)

weights_schemeWeightsScheme

Weights scheme to apply