Pure compound property prediction

Introduction

The Property Prediction program in ADF provides quick, accurate estimates for many important pure component physical properties. At its core, the Property Prediction program maps various QSPR descriptors of an input molecule onto a single numerical value, the property estimate. Many of these property models rely on easy-to-evaluate QSPR descriptors and numerically straightforward computations, meaning that an estimate can be provided for every property in << 1s per molecule. The general expression for the models used in the Property Prediction program is as follows:

\[f(P) = C + g \left( \sum\limits_i c_i n_i \right) + h\left( \sum\limits_i d_i n_i, T \right)\]

where f is a function that transforms the property value space, g is a function that maps QSPR descriptors onto a numerical value, and h is a function which also captures temperature-dependence of certain properties by including temperature, T, as an input. Additionally, C is a constant, \(n_i\) refers to QSPR values of QSPR descriptor i, and \(c_i\) and \(d_i\) are fitted coefficients corresponding to each QSPR descriptor i.

The accuracy of the property estimates depends on the nature/complexity of the input molecular structure. For many common organic structures, the property estimates should be reasonably accurate. However, as is always the case with QSPR models, the Property Prediction program will likely lose accuracy for molecules outside its training domain, i.e., for molecules that are very “dissimilar” to compounds which occur in the training set. In general, the program can be used for molecules with the following atom types:

Accepted atom types Example functional groups which can be used with atom type
H Alkanes, Alkenes, Alkynes, Aldehydes, Amides, Amines, Aromatics, Carboxylic Acids, Hydroxides, Sulfides, Thiols
C Acid chlorides, Alkanes, Alkenes, Alkynes, Aldehydes, Amides, Aromatics, Carboxylic Acids, Esters, Ethers, Ketones, C-X (halogens)
N Amides, Amines, Aromatics, Cyanides, Imines, Nitro groups
O Acid chlorides, Aldehydes, Amides, Aromatics, Carboxylic Acids, Esters, Ethers, Ketones, Nitro groups
F -CF, -CF2, -CF3
S Sulfides, Thiols
Cl Acid chlorides, -CCl, -CCl2, -CCl3
Br -CBr
I -CI

A brief description of molecule types for which this method will not work well is given in the General warnings section. Common molecules for which this method will fail are: (1) those that contain only one non-hydrogen atom, e.g., Methane or Water; (2) those that contain atoms not listed in the table above.

Available properties

The Property Prediction program can predict the values of various pure component physical properties. These properties can be of interest themselves or can be used in conjunction with other COSMO-RS property calculations (e.g., to calculate the solubility of a solid in a liquid, we must know the enthalpy of fusion and melting point of the solid – both of these properties can be estimated with the Property Prediction program). The available properties and their units are listed below:

Property Name Units Additional Information Typical error
Boiling point K at 1 atm 15 K
Critical Pressure bar   1.5 bar
Critical Temperature K   30 K
Critical Volume L/mol   0.02 L/mol
Dielectric Constant     3
Ideal Gas Entropy J/(mol K) at 298.15 K and 1 bar 20 J/(mol K)
Flash point K   15 K
Gibbs Energy Ideal Gas kJ/mol at 298.15 K and 1 bar 25 kJ/mol
Enthalpy of Combustion kJ/mol at 298.15 K 50 kJ/mol
Std. Enthalpy of Formation kJ/mol at 298.15 K and 1 bar 30 kJ/mol
Enthalpy of Fusion kJ/mol at Normal Melting Point 4 kJ/mol
Enthalpy of Form. Ideal Gas kJ/mol at 298.15 K and 1 bar 25 kJ/mol
Enthalpy of Sublimation kJ/mol   5 kJ/mol
Melting point K at 1 atm 35 K
Liquid Molar volume L/mol at 298.15 K 0.005 L/mol
(Liquid Density) kg/L at 298.15 K uses Liquid Molar Volume
Liquid Vapor Pressure bar   10-30%
Parachor     7
Solubility Parameter (cal/cm^3)^1/2 at 298.15 K 0.7
Triple point temperature K   35 K
Van der Waals Area Ų   6 Ų
Van der Waals Volume ų   3 ų

Running the Property Prediction program

The Property Prediction program can be run from the command line. The following general flags are used by the program:

Flag Purpose Example
-h [--help] Produces help message $AMSBIN/prop_prediction --help
-s [--smiles] Input molecule as SMILES sting $AMSBIN/prop_prediction --smiles <SMILES> ...
-m [--mol] Input molecule as .mol file $AMSBIN/prop_prediction --mol <mol file> ...
--temperature Set temperature/range (K) $AMSBIN/prop_prediction --temperature 298.15 ...
-n number of steps for temperature range $AMSBIN/prop_prediction --n 20 ...
-d [--display] Display calculated properties $AMSBIN/prop_prediction --d ...
-o [--output] Write output to file $AMSBIN/prop_prediction --o <output file> ...

Note, if no output flag is supplied, then the results are written to a file called CRSKF by default. Additionally, the user may enter as many compounds as desired on the command line in either of the two available input formats.

The program can be run in 2 ways:

  • Estimating all available properties for every molecule
  • Estimating specific properties for every molecule

To estimate all properties for every input compound, simply execute the program with all molecules specified on the command line. Don’t forget that the -d flag is required to display the results in the terminal. An example of this is below.

$AMSBIN/prop_prediction --smiles CCCCCCO -o example.crskf -temperature 298.15 -temperature 398.15 -n 20 -d
Boiling point at standard pressure :
CCCCCCO              435.777  K
Critical pressure :
CCCCCCO              34.3493  bar
Critical temperature :
CCCCCCO              576.466  K
Critical volume  :
CCCCCCO             0.404124  L/mol
Liquid density :
CCCCCCO              0.79182  kg/L
Dielectric constant :
CCCCCCO              10.9512
Absolute entropy of an ideal gas at 298.15 K and 1 bar :
CCCCCCO              439.885  J/(mol K)
Flash point :
CCCCCCO              342.271  K
Gibbs energy of formation for an ideal gas at 298.15 K and 1 bar :
CCCCCCO             -131.869  kJ/mol
Net enthalpy of combustion at 298.15 K  :
CCCCCCO             -3678.12  kJ/mol
Standard state enthalpy of formation at 298.15 K and 1 bar :
CCCCCCO             -384.388  kJ/mol
Enthalpy of fusion at normal melting point :
CCCCCCO              18.5054  kJ/mol
Enthalpy of formation for an ideal gas 298.15 K :
CCCCCCO             -316.821  kJ/mol
Enthalpy of sublimation :
CCCCCCO              80.9799  kJ/mol
Melting point at 1 atm :
CCCCCCO              231.141  K
Liquid molar volume :
CCCCCCO             0.128949  L/mol
Parachor :
CCCCCCO              289.059
Solubility parameter :
CCCCCCO              10.1294  (cal/cm^3)^0.5
Triple point temperature :
CCCCCCO              230.404  K
Van der Waals area :
CCCCCCO              171.059  Å^2
Van der Waals volume :
CCCCCCO              120.519  Å^3
Liquid vapor pressure :
Molecule: CCCCCCO
   Temperature (K)     Vapor pressure (bar)
    298.15                 0.001229
    303.15                 0.001809
    308.15                 0.002623
    313.15                 0.003750
    318.15                 0.005289
    323.15                 0.007362
    328.15                 0.010123
    333.15                 0.013757
    338.15                 0.018487
    343.15                 0.024582
    348.15                 0.032357
    353.15                 0.042182
    358.15                 0.054484
    363.15                 0.069757
    368.15                 0.088563
    373.15                 0.111537
    378.15                 0.139394
    383.15                 0.172929
    388.15                 0.213022
    393.15                 0.260644
    398.15                 0.316852

For most applications, it is not necessary to calculate all of the available physical properties (although doing so is practically just as fast). In these cases, additional property flags need to be specified on the command line to restrict the program to calculating only certain physical properties. For example, if we were doing solid/liquid solubility calculations on Ibuprofen and Paracetamol, we would require the Enthalpy of Fusion and the Melting Point of both compounds. To calculate only these two properties, we simply have to add the two property flags “-hfusion” and “-meltingpoint” to the command line. Using the .mol file for Ibuprofen and the SMILES string for Paracetamol, we execute the following:

$AMSBIN/prop_prediction -d -m Ibuprofen.mol -s 'CC(=O)NC1=CC=C(C=C1)O' -hfusion -meltingpoint
Enthalpy of fusion at normal melting point :
CC(=O)NC1=CC=C(C=C1)O      33.0298  kJ/mol
Ibuprofen.mol              24.0336  kJ/mol

Melting point at 1 atm :
CC(=O)NC1=CC=C(C=C1)O      469.282  K
Ibuprofen.mol              331.887  K

Index of property keys

The available properties and their corresponding property flags are listed below:

Property Name Property Flag
Boiling point --boilingpoint
Critical Pressure --criticalpressure
Critical Temperature --criticaltemp
Critical Volume --criticalvol
Dielectric Constant --dielectricconstant
Ideal Gas Entropy --entropygas
Flash point --flashpoint
Gibbs Energy Ideal Gas --gidealgas
Enthalpy of Combustion --hcombust
Std. Enthalpy of Formation --hformstd
Enthalpy of Fusion --hfusion
Enthalpy of Form. Ideal Gas --hidealgas
Enthalpy of Sublimation --hsublimation
Melting point --meltingpoint
Liquid Molar volume --molarvol
(Liquid Density) --molarvol
Liquid Vapor Pressure --vaporpressure
Parachor --parachor
Solubility Parameter --solubilityparam
Triple point temperature --tpt
Van der Waals Area --vdwarea
Van der Waals Volume --vdwvol

General warnings

This method will fail for the following types of molecules:

  • Those that contain only one non-hydrogen atom (e.g., Methane or Water). However, experimental data is ample for these small molecules. The vapor pressure model is the exception in that it can represent such small structures.
  • Those that contain atoms or substructures that are not listed in the Accepted atom types table above.
  • Polymers and Ionic Liquids

This method will lose accuracy for some properties in the following domains:

  • Molecules with many different types of functional groups
  • Molecules that are extremely light (< 3 non-Hydrogen atoms) or heavy (> 30 non-Hydrogen atoms)

Equations for temperature-dependent properties

VPM1: liquid vapor pressure

\[ln(P) = A/T + Bln(T) + CT + D\]
Symbol Meaning
P vapor pressure
T absolute temperature
A,B,C,D estimated constants