SM12: Solvation Model 12

Continuum solvation can be done with the Minnesota’s Solvation Model 12 (SM12) [1]. Details on the implementation of SM12 in ADF can be found in Ref. [2]. The energetics of solvation is calculated using:

\[\Delta G_S^\otimes = \Delta E_E + G_P + G_{CDS} + \Delta G_N + \Delta G_{conc}^\otimes\]

where the symbol \(\otimes\) denotes an arbitrary choice of standard states, \(\Delta E_E\) is the change in the solute’s internal electronic energy in transferring from the gas phase to the liquid phase at the same geometry, \(G_P\) is the polarization free energy of the solute–solvent system when the solute is inserted, \(G_{CDS}\) is the component of the free energy that is nominally associated with cavitation, dispersion, and solvent structure, \(\Delta G_N\) is the change in \(\Delta G_S^0\) due to a change in nuclear coordinates, and \(\Delta G_{conc}^\otimes\) accounts for the difference in concentrations, if any, in the gas-phase standard state and the solution-phase one. In case of 1 M concentration in both solution and gas, then \(\Delta G_S^\otimes\) = 0 kcal/mol, which yields \(\Delta G_S^*\). If the same geometry is used in solution and gas phase calculation, then \(\Delta G_N\) is zero.

SM12 makes use of the Generalized Born approximation to calculate the bulk electrostatic contribution. This is comprised of several terms that are together known as the ENP (Electronic, Nuclear, and Polarization) term \(G_P\). The SM12 model in ADF uses CM5 charges [3]. CM5 is a class 4 charge model, making use of both empirical and density related terms. It is comprised of Hirshfeld charges [4], a simple bond order calculation, atomic distances, and atom specific parameters [3]. The covalent radii utilized are based on the atomic covalent radius from the Handbook of Chemistry and Physics [5]. The Coulomb integral is described with the use of an approximation from Still et al. [6]. Several parameters go into describing this, which include: inter atomic distance, an empirical Born constant, and the Born area, which is calculated with the Analytical Surface Area (ASA) algorithm [7]. The Born area is calculated using Legendre-Gauss quadrature from the atomic radii to a sphere that encapsulates the entire molecule.

The ASA algorithm is also used to calculate the solvent accessible surface area (SASA), which is computed within the CDS (Cavitation, Dispersion, Solvation) term of SM12. The CDS term depends on three terms:

  • SASA (ASA Algorithm)
  • Atomic surface tension
  • Macroscopic surface tension

Atomic surface tension is based on atom-atom distances and the solvent. Macroscopic surface tension is solvent specific. The SM12 implementation in ADF reports energies in an atom specific way. You can attribute exact CDS and polarization energies to each atom in your solute. The parameters for SM12 are derived to explicitly incorporate organic elements (N, C, O, F, Si, P, S, Cl, Br, I), with less emphasis on non-organics. Also, while most solvents have a generic atomic surface tension reliance for atoms, water has its own explicit set of parameters to better describe it.

SOLVATION SM12
  {SOLV NAME=solvent}
  {CUST {NAME=solvent}}
  {REF=1.33}
  {ACID=0.82}
  {BASE=0.35}
  {TENS=103.62}
  {EPS=78.36}
  {ARO=0.0}
  {HALO=0.0}
  {RADSOLV=0.4}
  {CHGAL=2.474}
  {BORNC=3.70}
  {PRINTSM12}
End

Presence of the SOLVATION SM12 key block key triggers the solvent calculation and does not require additional data. If no other keywords are present the default is water. With subkeys you can customize various aspects of the model, for instance to specify the type of solute. None of the subkeys is obligatory. Follows a description of the subkeys

SOLV NAME = solvent

Defines which solvent to be used. Each solvent has parameters set for each of the variables defined below. All of which can be found in the SM12 Ref. [1]. Any variable can be changed with the inclusion of its key. solvent can be one of the following:

  • ACETICACID
  • ACETONITRILE
  • ACETOPHENONE
  • ANILINE
  • ANISOLE
  • BENZENE
  • BENZONITRILE
  • BENZYLALCOHOL
  • BROMOBENZENE
  • BROMOETHANE
  • BROMOFORM
  • BROMOOCTANE
  • N-BUTANOL
  • SEC-BUTANOL
  • BUTANONE
  • BUTYLACETATE
  • N-BUTYLBENZENE
  • SEC-BUTYLBENZENE
  • T-BUTYLBENZENE
  • CARBONDISULFIDE
  • CARBONTETRACHLORIDE
  • CHLOROBENZENE
  • CHLOROFORM
  • CHLOROHEXANE
  • M-CRESOL
  • CYCLOHEXANE
  • CYCLOHEXANONE
  • DECALIN
  • DECANE
  • DECANOL
  • 1-2-DIBROMOETHANE
  • DIBUTYLETHER
  • O-DICHLOROBENZENE
  • 1-2-DICHLOROETHANE
  • DIETHYLETHER
  • DIISOPROPYLETHER
  • N-N-DIMETHYLACETAMIDE
  • N-N-DIMETHYLFORMAMIDE
  • 2-6-DIMETHYLPYRIDINE
  • DIMETHYLSULFOXIDE
  • DODECANE
  • ETHANOL
  • ETHOXYBENZENE
  • ETHYLACETATE
  • ETHYLBENZENE
  • FLUOROBENZENE
  • 1-FLUORO-N-OCTANE
  • HEPTANE
  • HEPTANOL
  • HEXADECANE
  • HEXADECYLIODIDE
  • HEXANE
  • HEXANOL
  • IODOBENZENE
  • ISOBUTANOL
  • ISOOCTANE
  • ISOPROPANOL
  • ISOPROPYLBENZENE
  • P-ISOPROPYLTOLUENE
  • MESITYLENE
  • METHANOL
  • METHOXYETHANOL
  • METHYLENECHLORIDE
  • N-METHYLFORMAMIDE
  • 2-METHYLPYRIDINE
  • 4-METHYL-2-PENTANONE
  • NITROBENZENE
  • NITROETHANE
  • NITROMETHANE
  • O-NITROTOLUENE
  • NONANE
  • NONANOL
  • OCTANE
  • OCTANOL
  • PENTADECANE
  • PENTANE
  • PENTANOL
  • PERFLUOROBENZENE
  • PHENYLETHER
  • PROPANOL
  • PYRIDINE
  • TETRACHLOROETHENE
  • TETRAHYDROFURAN
  • TETRAHYDROTHIOPHENEDIOXIDE
  • TETRALIN
  • TOLUENE
  • TRIBUTYLPHOSPHATE
  • TRIETHYLAMINE
  • 1-2-4-TRIMETHYLBENZENE
  • UNDECANE
  • WATER
  • XYLENE
  • 1-2-DIBROMOETHANE_WATER
  • 1-2-DICHLOROETHANE_WATER
  • BENZENE_WATER
  • CARBONTETRACHLORIDE_WATER
  • CHLOROBENZENE_WATER
  • CHLOROFORM_WATER
  • CYCLOHEXANE_WATER
  • DIBUTYLETHER_WATER
  • DIETHYLETHER_WATER
  • ETHYLACETATE_WATER
  • HEPTANE_WATER
  • HEXANE_WATER
  • NITROBENZENE_WATER
  • OCTANOL_WATER
CUST {NAME=solvent}
A solvent with user specified parameters can be used. A user specified name of the solvent solvent can be provided, but should not match one of the solvent names listed above. Any un-specified parameters will be set to zero, with the exception of the dielectric constant, which will be set to the dielectric constant of water.
REF
Index of refraction at 293K (n).
ACID
Abrahams hydrogen bond acidity (\(\alpha\)).
BASE
Abrahams hydrogen bond basicity (\(\beta\)).
TENS
Macroscopic surface tension of the solvent at the air interface cal mol-1 Å-2)(\(\gamma\)).
EPS
Dielectric constant. If not specified it will be set to the default of water. (\(\epsilon\)).
ARO
Square root of the fraction of non-hydrogen atoms in the solvent molecule that are aromatic carbon atoms (carbon aromaticity) (\(\phi\)).
HALO
Square of the fraction of non-hydrogen atoms in the solvent molecule that are halogens (Electronegative halogenicity)(\(\psi\)).
RADSOLV
Solvent radius, this is added to the van der Waals radius used for the cavity calculation.
BORNC
Empirical Born constant, see Ref. [1]
PRINTSM12
Print more information on the SM12 calculation: CDS atom terms, ENP charges.

References

[1](1, 2, 3) A.V. Marenich, C.J. Cramer, and D.G. Truhlar, Generalized Born Solvation Model SM12, Journal of Chemical Theory and Computation 9, 609 (2013)
[2]C.A. Peeples and G. Schreckenbach, Implementation of the SM12 Solvation Model into ADF and Comparison with COSMO, Journal of Chemical Theory and Computation 12, 4033 (2016)
[3](1, 2) A.V. Marenich, S.V. Jerome, C.J. Cramer, D.G. Truhlar, Charge Model 5: An Extension of Hirshfeld Population Analysis for the Accurate Description of Molecular Interactions in Gaseous and Condensed Phases, Journal of Chemical Theory and Computation 8, 527 (2012)
[4]F.L. Hirshfeld, Bonded-atom fragments for describing molecular charge densities, Theoretica Chimica Acta 44, 129 (1977)
[5]M. Mantina, R. Valero, C.J. Cramer, D.G. Truhlar, in CRC Handbook of Chemistry and Physics, 91st ed. (2010-2011), ISBN13 9781439820773, W.M. Haynes, Ed., CRC Press: Boca Raton, FL, 2010.
[6]W.C. Still, A. Tempczyk, R.C. Hawley, and T. Hendrickson, Semianalytical treatment of solvation for molecular mechanics and dynamics, Journal of the American Chemical Society 112, 6127 (1990)
[7]D.A. Liotard, G.D. Hawkins, G.C. Lynch, C.J. Cramer, and D.G. Truhlar, Improved Methods for Semiempirical Solvation Models, Journal of Computational Chemistry 16, 422 (1995)